- Makes up to 50 gallons of pure water per day
- Includes Booster Pump
- Complete system
The SR Aquaristik HALCYON R/O DI Purification System has been designed to fulfill the needs of discriminating aquarium hobbyists. The HALCYON system removes up to 99% of tap water impurities, including difficult to remove heavy metals. Featuring a super quiet booster pump, ultrafine sediment filtration, high-quality carbon and refillable DI cartridge making it the ideal solution providing aquarium hobbyists with a strong foundation and superior water quality.
Includes:
- Complete RO/DI System
- Automatic shut off valve
- Push connections with EPDM O-ring fittings
- Rugged metal frame with mounting brackets
- 50 GPD TFC Membrane
- Polypropylene Sediment Cartridge
- Carbon Block Cartridge
- Refillable DI Cartridge with high capacity color
- changing resin
- Booster Pump
- Canister/Membrane Wrench
- Utility sink connection
- 10 Feet of RO Tubing
Dimension:
- Length: 14.2” / 36cm
- Width: 7.3” / 18.5cm
- Height: 17.7” / 45cm
Installation Note:
When installing anything with an EPDM or silicone O-ring, it needs to be lubricated. This is extremely important when installing reverse osmosis canisters because they need to slide when being seated. It is also imperative that they are not over-tightened. Oftentimes during installation, the O-rings are not lubricate and will they tend to leak because the O-ring can get bunched up. Additionally, the canister can be over-tightened which can cause the threads to separate from the canister. This causes many stress cracks, especially when the threads are broken away from the main canister.
To properly install:
1) Remove the O-ring from the canister.
2) Lubricate the O-ring using a food-grade silicone lubricant (we use Super Lube - this can be purchased at a hardware store; used for lubricating sink aerators). Olive oil can also be used in a pinch.
3) Reinstall the O-ring.
4) Hand-tighten the canister. If it is difficult to hand tighten, do a hand tighten and then 1/8th of a turn.
5) If the canister leaks, make sure that the O-ring is properly seated.